Deutsch
Español
Français
Italiano
Português
Pусский
العربية
Niobium Zirconium Alloy Wire
Niobium metal can be cold-pressed into rods, sheets, wire and other products. Niobium can withstand high temperature and high strength, and still has sufficient strength, good plasticity and thermal conductivity above 1000°C. Superconductivity is best at extremely low temperatures. For example, its resistance is close to zero at minus 260°C. It is currently the most important superconducting material.Specification size: diameter 0.2mm~3.0mm, if you have special requirements, please negotiate
Niobium powder
Niobium is a silver-gray, soft, and ductile transition metal with a melting point of 2468°C, a boiling point of 4742°C, and a density of 8.57 g/cm3. Niobium is stable in the air at room temperature, and is not completely oxidized when it is red hot in oxygen. It can directly combine with sulfur, nitrogen, and carbon at high temperatures, and can form alloys with titanium, zirconium, hafnium, and tungsten. It does not interact with mineral acids or alkalis, nor is it soluble in aqua regia, but it is soluble in hydrofluoric acid. Because the physical and chemical properties of niobium are similar to those of tantalum, and the two elements are often co-existing, it is difficult to separate pure niobium without impurity tantalum.
Niobium sheet/Niobium plate
Niobium and high-temperature niobium-tungsten alloy materials are widely used in aerospace engines, weapon thrusters, rocket and missile liquid two-component engines, nuclear reactors, submersibles, gas turbines, automobile engines, diesel engines, high-temperature furnace heating belts, high-temperature molds, Manufacturing of high temperature fixtures and high temperature crucibles.Standard sizes：Thickness (0.15~6.0)mm × width (50~300)mm×length (50~1000)mm, customer's special size and requirements can be negotiated
High purity niobium plate, niobium sheet
Grades: Nb1, Nb2, NbZr1, R04210-2Standard: GB/T3630-2006;
Purity: greater than 99.95%;
State: annealed state (M) or hard state (Y);
Application: Thermal protection and structural materials in aviation and aerospace industries, electronic tubes and other electric vacuum devices, superconducting materials, heat-resistant alloys and cemented carbides, etc.
Niobium rod/ niobium rod/ niobium bar
Note: Niobium can withstand high temperature and high strength, and still has sufficient strength, plasticity and thermal conductivity above 1000°C. Superconductivity is best at extremely low temperatures. For example, its resistance is close to zero at minus 260°C. It is currently the most important superconducting material.
